Rating of the best electric jigsaws 2022 (Top 30)

Топ-3 лучших выбора

#1.DeWalt	#2. Makita	#3.RYOBI
Узнать цену	Узнать цену	Узнать цену

A home workshop cannot be considered ideal if it does not have a jigsaw. A manual jigsaw is certainly good, but it often leaves crooked lines and not quite even surfaces. The electric jigsaw allows you to quickly complete the necessary work in the shortest possible time and is an extremely convenient assistant in cutting laminate, sheet steel, boards, etc. You just need to choose the right saw.

We have done a tremendous job - we have sorted out a lot of offers for jigsaws in retail outlets, sorted them and compiled a rating of the best tools for you, so that it would be easier for you to make a choice and understand how to choose a jigsaw and choose high quality files for it. The latter, by the way, are produced with four different types of tails, did you know about this? Read to the end, we will also talk about this and consider each option in detail.

Rating of the best electric jigsaws - TOP-30

Check the country of the manufacturer of electric jigsaws by the barcode:

Check any product online:

The best household network jigsaws

Electric jigsaws powered by an outlet are called networked. They are more productive than cordless jigsaws. Consider the rating of jigsaws that are in the top 10.

DeWALT DWE349 (650 W)

This household electric jigsaw, although harsh, is powerful. Optimum performance is achieved thanks to three pendulum modes. Since the inclination of the sole is not at all difficult to adjust, you can easily do without a key. The surface during processing will not be scratched due to the protective overlay on the sole. Fingers are reliably protected from falling into the cut area with metal staples.

Read also: best electric shaver

The jigsaw package includes everything you need for ease of use: electronic speed control, backlight brightness, a four-meter power cord, sawdust blower, pads on a comfortable handle. And practical application will give rise to ideas for improving the parameters.

Pros:

• low vibration;
• the presence of a button that fixes the inclusion;
• the ability to adjust the sole without a key;
• quiet enough;
• the gearbox housing is made of metal;
• weighs a little.

Minuses:

• no soft start;
• expensive.

Reviews:

Makita 4329 (450W)

A word of warning: this unit is not intended for professional use and should not be used for many hours a day as the support rollers are not strong enough. But the home master will be satisfied with this electric jigsaw, which is easily and conveniently located in the hand and almost does not vibrate, cuts with enviable speed and accuracy.

The frequency with which the saw moves is regulated by the wheel, if you grab the handle, it will be below the thumb - not too recessed, it will not accidentally go astray and the regulation will not complicate. This option is more convenient than jigsaws, in which you have to use the key itself to adjust the speed. In our case, it is enough to set up, and then continue to press the key without catching the desired mode.

Read also: top radios

The adjustable pendulum stroke is both an advantage (convenience during operation) and a disadvantage (decrease in the reliability of the model), something that has already been discussed above.

The chip blower functions perfectly, i.e. you will not clean it yourself. In addition, you can additionally connect a vacuum cleaner.

For the area in which the jigsaw is used, its power of 450 W is more than enough.

Pros:

• ease and convenience;
• has all the necessary adjustments;
• low degree of vibration.

Minuses:

• it is better not to subject to large loads.

Reviews:

BOSCH GST 700 (500 W)

This round-shaped electric jigsaw, comfortably located in the hand, with its power of 710 W will easily overcome thick metal (in relation to steel materials, the manufacturer claims a thickness of 10 mm), and even more so wood. Of course, the question arises whether the device of this series is legitimately ranked as an amateur, but this junior from the Bosch series for professionals has the following advantages: affordability and superior quality in comparison with exclusively amateur jigsaws.

Read also: rolling jack rating

The tool is made conscientiously: the sole made of steel is durable, and the course of adjustments is clear. It is protected from chips, so you can safely use solid wood in your work. Ease of use is complemented by the presence of a quick-clamp attachment of the file, which is certainly a big plus if you remove it and replace it during homework.

What didn't you like? The list is small - it is not very convenient to adjust the maximum speed, since the adjustment is made with a wheel directly on the key itself, and this is similar to an electric drill. This is an option for an amateur, it will not be possible to adjust it on the go. The lack of the ability to connect a vacuum cleaner also gives reason to regard the device as a home appliance rather than a professional one.

Pros:

• handle ergonomics;
• sufficiently high performance;
• reliability of the pendulum mechanism.

Minuses:

• the inconvenience of speed control;
• insufficient cord length.

Reviews:

ZUBR L-400 (400 W)

This tool is suitable for home use due to its compactness, ergonomics, lightness and will allow you to cut wooden beams up to 55 mm in thickness or work with steel, non-ferrous metals or other materials. The design of the jigsaw is very simple and due to this it is highly reliable.

Read also: miter saw selection

In addition, the device is distinguished by the presence of a pendulum mechanism, an inclined platform, it has a button for blocking the engine in the on mode and the ability to connect a vacuum cleaner. Zubr L-400 has good characteristics for operation, and this is favorably combined with affordability. Great for home use. Works without excessive vibration. The tool showed good results.

Pros:

• price-quality ratio;
• smoothness of movements;
• low noise level;
• convenient clip for saws.

Minuses:

• no.

Reviews:

BOSCH PST 700E (500 W)

Bosch PST 700E is a new generation electric jigsaw. With a powerful 620W motor and a 90mm cutting depth, you can easily get through the most demanding jobs. The tool is equipped with a Bosch SDS mechanism, which makes it easy to change the saw blade in a matter of moments, without exposing yourself to danger.

Read also: best lawn mower

Thanks to advanced cutting line control technology, you can guide the jigsaw with precision along the line you have marked. Excellent cutting accuracy is achieved with a low vibration system that provides low vibration, linear balance, ergonomic handle, complemented by a soft grip. Thanks to Bosch PST 700E you will forget about foreign objects and will be able to concentrate entirely on your favorite business.

Pros:

• the pendulum stroke is balanced;
• the presence of a convenient clamp of the saw blade;
• the ability to control the stroke rate;
• the ability to adjust the base plate;
• low degree of vibration;
• excellent curly cut;
• build quality.

Minuses:

• the cut line is devoid of lighting;
• high cost.

Reviews:

Metabo STEB 65 Quick (450W)

Metabo STEB 65 is a fairly light jigsaw for professionals, it has been on the market since autumn 2015, it involves simple sawing work. This tool features an excellent functional-price balance.

The functionality of this model will allow you to professionally perform work due to the possibility of quick change of cloths, speed control, ergonomics.

Features of the Metabo STEB 65 Quick Jigsaw:

• The tool weighs little, is characterized by compact dimensions and carefully executed ergonomics. The handle has a textured surface and rubber lining, so that the tool fits comfortably in your hand and is under your complete control during work.
• The presence of the Metabo Quick clamp allows you to fix the canvas with just one lever. Without resorting to other tools, you can easily remove and install the necessary canvas.

The Metabo STEB 65 Quick tool is characterized by the presence of a speed control system, which will allow you to work with materials that have different properties. Using the wheel, you will be able to increase the speed of the blade and determine the most efficient working mode of the tool.

With the help of a four-stage pendulum stroke, a balance of speed of cut and cleanliness of the cut will be achieved.

The cutting area has a good overview thanks to the switchable sawdust blowing option. A typical branch pipe with a length of 28 mm will allow you to connect a vacuum cleaner and effectively organize the mechanism for removing sawdust. Die-cast aluminum soleplate with +/- 45 degree angle adjustment. A special compartment is provided to store the hex key for adjusting the soleplate. Charging cord with a length of 2.5 m.

Pros:

• sawdust blowing option;
• compact;
• lies comfortably in the hand.

Minuses:

• no.

Reviews:

Interskol MP-55/500E (500 W)

This jigsaw is not much cheaper than the Makita, but compared to it it is a loser. In home use, there is no constant need for 700-watt power, but the heavy weight and sluggishness will create significant inconvenience.

Taking into account the build quality of the device, we advise you to carefully inspect it at the time of purchase for the presence of backlash. Progress on these won't be fast, so just choose "direct" and that'll be enough. If you plan to actively use the tool and load it heavily, purchase a support roller in advance - it has an obvious insufficient resource.

It was found that the jigsaw has an active anti-vibration system: a weight moving in antiphase compensates for vibrations in the saw blade drive. However, due to the mass of the jigsaw, it is unlikely that the vibration would be strong.

I liked the speed controller: although it is made for right-handed people, the wheel fits under the thumb as it should.

Pros:

• impressive power;
• convenience of coverage;
• insignificant degree of vibration.

Minuses:

• it is possible that the file will play or mow;
• insufficient cord length;
• cord stiffness.

Reviews:

VORTEX LE-55B (500 W)

Using the VORTEX LE-55B electric jigsaw, you can cut lumber, make longitudinal cuts and cuts in wood, synthetic materials. The tool can also work with metal, ceramic plates, rubber. The power button can be blocked, and this will save the user from excessive fatigue if the work is delayed. You will be able to cut at a certain angle with the support plate tilted up to 45º to the left or right. Dust extraction with the option of connecting a dust bag or a vacuum cleaner will provide you with a clean workspace.

Pros:

• power and reliability of the electric motor;
• the presence of a cast platform with a swivel mechanism;
• the ability to adjust the speed of the web;
• rubberized pads, which are equipped with handles in the form of a bracket;
• the ability to block the engine in the "on" mode;
• the presence of a laser pointer on some models, which increases the accuracy of the cut;
• the presence of a system for getting rid of dust, the ability to connect to a household or construction vacuum cleaner.

Minuses:

• the power cord is not long enough, made of low-quality plastic;
• the saw blade replacement system on some models is not convenient;
• the work area is not lit.

Reviews:

The best household cordless jigsaws

BOSCH PST 18LI

This tool pleased with its ergonomics, immediately there is a desire to test it in work. Unfortunately, it does not provide for blowing the place of the saw, you can remove sawdust only by connecting a vacuum cleaner, but the presence of a backlight is a noticeable plus.

It has a very average power: for example, the maximum cutting thickness of 5 mm is declared for steel. In principle, this is an acceptable ratio of power and battery consumption.

Directly the drive mechanism suggests German quality: precise regulation of the pendulum stroke, micro backlash, which do not affect the cutting accuracy. In operation, the tool does not emit too much noise and vibration.

The overall impression is “four plus”, but still I would like the presence of sawdust blowing.

Pros:

• ergonomics "brought to mind";
• the quality of the materials.

Minuses:

• sawdust blowing is absent.

Reviews:

Makita JV100DWE

The Makita JV100DWE cordless jigsaw is lightweight, compact and ranks 3rd in this category. It functions well in straight as well as curly cuts. You can make quick, rough cuts thanks to the three-stage pendulum stroke. You can set the slope for the sole in both directions. The force of pressing the start button controls the sawing speed, it is possible to block the button from involuntary start. The worker is protected from flying sawdust by a special transparent screen. Low vibration and low noise, the handles are equipped with non-slip inserts. By the way, this device should not be subjected to heavy loads, however, in general, it is quite comfortable to use.

Pros:

• the ability to control the number of revolutions;
• light weight;
• soles are adjustable in two directions;
• acceptable noise level;
• low vibration.

Minuses:

• power.

Reviews:

Makita JV103DZ

This jigsaw is compact, it is comfortable to hold, there are vibration-proof pads on the handle. You should not rely on the power that mains-powered models have, this tool is more suitable for work that requires clarity and accuracy, as it runs on battery power (by the way, when buying, look at batteries with increased capacity).

The sawdust blowing option works excellently, the pendulum mechanism is adjusted using a four-position switch. By pressing the start button, you control the speed, but for a tool with low power this is a small minus, since you will mainly press the button all the way.

Pros:

• excellent ergonomics;
• blowing sawdust.

Minuses:

• fast battery drain.

Reviews:

Metabo STAB 18 LTX 100

The pendulum stroke, which has a Metabo STAB 18 LTX 100 cordless jigsaw, makes it possible to build work with a specific material. Soft pads on the closed handle will allow you to hold the jigsaw with reliability and comfort during operation. By increasing or decreasing the pressure on the switch, you adjust the speed of the jigsaw. No other tools are required to set up the base, making bevel cutting easier.

Pros:

• the ability to accurately cut, taking into account the properties of materials, thanks to such characteristics as a variable number of strokes, low blade guidance supported by a spring, a pendulum stroke;
• the presence of an arc handle, on which there is a non-slip Softgrip pad;
• an overview of the work area is provided thanks to the sawdust blowing option;
• the presence of battery blocks with a charge level indicator;
• the presence of the Ultra-M system, characterized by maximum power and gentle charging.

Minuses:

• not found.

Reviews:

The best professional network jigsaws

DeWalt DW331K (700W)

The DeWALT tool has a very solid weight, it is distinguished by the uniform operation of the mechanism in the presence of a load. From the list of the best jigsaws, this one, in our opinion, has the most convenient file change system: one movement is enough for a solid fixation.

A motor with a power of 700 W is distinguished by the presence of a soft start and a mechanism for maintaining speed in automatic mode, silent operation and low vibration strength. In particular, this is achieved through the use of a counterweight in the gearbox. All this is complemented by an adjustable sawdust blower!

In view of the foregoing, we can conclude that the DeWALT electric jigsaw is suitable for almost all work, with the exception of cutting by weight due to its rather large mass.

Pros:

• convenient and reliable;
• smooth start;
• lies well in the hand.

Minuses:

• too heavy.

Reviews:

Makita 4350FCT (720 W)

If you want to get more circles or curves when working, then we suggest you opt for the Makita 4350FCT electric jigsaw for professionals, which has high power and backlight. When processing decorative veneer and plastic, a special overlay protects the material from various damages. It will be possible to avoid fragments when sawing thanks to the mechanism against splitting. The permanent work button will block the switched on jigsaw mode, and this will help to significantly save energy for work. With the help of the pressure wheel, even cuts are made, and this prolongs the life of the saw blade. Weak lighting is compensated by the presence of LED backlighting. We recommend to buy.

Pros:

• significant power (720 W);
• lighting;
• there is a pendulum move;
• the presence of a quick-release fastener;
• there is a button for fixing permanent work;
• the ability to adjust the base plate.

Minuses:

• if you make a straight cut, you will need to additionally control the accuracy of the line.

Reviews:

Metabo STE 100 QUICK (710W)

The Metabo STE 100 Quick jigsaw has been on the market since 2017. It is made using all advanced technologies, and in user reviews it has received the characteristics of the ideal. The 710 W motor allows you to process different surfaces.

The material affects the depth of cut:

• on wood - 100 mm;
• for steel material - 8 mm;
• for aluminum and metals (non-ferrous) - 22 mm.

The saw blade stroke is 22 mm, and the sole slope has an indicator of 45 mm. Metabo STE 100 Quick weighs quite a bit (excluding power cord - 2 kg), and is suitable for construction and repair. It can be used at home, it can be practiced in diametrical and straight cuts on wood and other surfaces. In terms of price-quality ratio, this is a good option.

Pros:

• the convenience of the handle in the shape of a mushroom and the balance of the body;
• network cable length - 4 m;
• convenience of tool-free replacement of the Metabo Quick saw blade;
• can be connected to a household vacuum cleaner;
• the presence of an adjustable airflow of the working area;
• the Metabo Vario-Constamatic maintains the speed when there is a load.

Minuses:

• there is no soft start option;
• work in areas with low visibility is difficult due to the lack of a lighting system;
• lack of a transportable storage box.

Reviews:

Bosch GST 850 BE (600 W)

This jigsaw is designed for vacuuming and excellent dust removal. The 600-watt motor helps to release a lot of chips.

The jigsaw has excellent grip ergonomics. Thanks to the rigid quick-clamping fastening, the file is firmly fixed, the jigsaw easily leads the line without distortions.

It is a pleasure to work with this jigsaw. It emits a little vibration and noise, however, due to the massiveness of this jigsaw, it is more preferable to use it horizontally.

Pros:

• different build quality;
• high performance.

Minuses:

• uncomfortable to use with one hand.

Reviews:

Makita JV0600K (650W)

This jigsaw has sufficient power (650 W), fits comfortably in the hand and, what is very important, the frequency of strokes has electronic stabilization. The remaining parameters of the tool are consistently average: there are advantages, as well as disadvantages.

In short, trust your intuition when you view it at the point of sale, chances are you'll like it.

Pros:

• comfortable grip;
• low vibration.

Minuses:

• speed controller.

Reviews:

DeWALT DW333K (701W)

It would be quite attractive if it were not for a special grip: it is comfortable to lead with two hands, in comparison with the classic brackets, and it is more difficult to guide along the line with one hand. In addition to this, the jigsaw weighs quite a lot (2.8 kg).

In other parameters, the tool is located next to the leader of the rating: the same speed support mechanism, effective vibration damping, a well-designed quick-change mount.

However, this jigsaw is also the most expensive in the current rating scale, and it cannot be argued that it is better than the DW331K, which has a price less than 2 thousand.

Pros:

• engine power;
• minimum vibration in operation.

Minuses:

• special grip;
• weighs a lot.

Reviews:

The best professional cordless jigsaws

Bosch GST 18 V-LI B

The use of a generic battery is a great advantage for those who own several electric tools under the same brand name (the blue series from Bosch is very popular for collecting). It is noteworthy that the kit comes with an insert for the L-BOXX.

I would like to note a good balance of battery life and performance: the tool is subject to steel almost 8 mm in thickness, which is the norm for battery models. This is a good jigsaw for metal. The rubber pad has the so-called "pimples", so that the tool is clearly located in the hand. Note the presence of an adjustable pendulum in the mechanism, the absence of excessive sounds and vibrations. In short, the German label lives up to its name.

Pros:

• convenience, speed in the right measure, sufficient efficiency;
• good quality quick change mount.

Minuses:

• avoid dropping the tool on the concrete as the jigsaw has a cast aluminum base.

Reviews:

DeWALT DCS334N

The DEWALT DCS334N-XJ is a light weight cordless jigsaw for professional use with a brushless motor.

This premium model is suitable for 18 volt Li-Ion batteries of any capacity from 1.3 to 9 Amp / h, due to this, it increases the operating time and provides power like that of network counterparts. Thanks to the advanced brushless motor, you will forget what it is like to change brushes, and energy losses on the nodes will be reduced.

This is the best jigsaw for wood, metal, plastic. It has a three-position pendulum stroke, it is also distinguished by a quick change of files and the possibility of a two-sided angular inclination of the sole. The kit contains a special pad on the sole to protect the treated surface from chips, as well as the fasteners necessary to connect the vacuum cleaner.

Models of the XR (eXtreme Runtime) Li-Ion series are very reliable and convenient, I would like to note that the tool series as a whole and the batteries of the series are compatible with each other. This model is shipped without a battery and charger to bring down the price, since it is more profitable to buy a charger and battery one time, and it will fit all tools.

Pros:

• battery operated;
• high quality;
• the ability to work at an angle;
• considered top of the market.

Minuses:

• no.

Reviews:

Makita DJV182Z

Makita DJV182Z is a cordless jigsaw for professional use, allows you to saw wood blanks, plastic blanks and others. The tilt of the base plate in two directions by 45 degrees is provided. The convenience of the D-shaped handle leads to the minimization of labor costs for the worker and increases the time of productive work.

Thanks to the built-in vacuum cleaner nozzle, dust-free work is guaranteed. In addition to the jigsaw, the delivery set also includes a chip-protection plate, a vacuum cleaner nozzle and two hex keys B10, BR13, B22. It should be noted that the transport case, charger and battery are not included in the kit.

Pros:

• the ability to quickly and easily replace the canvas;
• work under the condition of insufficient light is facilitated by the presence of a built-in backlight;
• the presence of an ergonomic handle;
• the presence of a large trigger switch;
• long work with the tool will not affect your fingers;
• the ability to adjust the speed;
• the presence of a convenient electronic switch that reduces the energy consumption of the user;
• Brushless DC motor (BLDC) is maintenance-free.

Minuses:

• price.

Reviews:

Metabo STA 18 LTX 140

Here is a sketch of the parameters of the kit with batteries. It is worth noting that the jigsaw is convenient (but only for right-handers), extremely productive, does not create much noise.

A high level of functionality: the presence of a soft start, as well as a mechanism for supporting the frequency of strokes, in addition to effective airflow, there is a backlight. However, the price is much higher than analogues, so it is worth buying it solely with the expectation that in the future, already “not stuffed” Metabo tool kits will be purchased.

Pros:

• comfortable to use;
• high performance.

Minuses:

• price.

Reviews:

HIPER HJS18C

Electric manual jigsaw HIPER HJS18C. This tool is convenient and functional, the work is provided by a built-in battery of the Li-Ion type, with a power of 2.4 Ah and a voltage of 18 V. The saw stroke has the smallest frequency - 1 stroke / minute, the highest value of this parameter is 2500 stroke/minute. The stroke has a length of 18 mm. In addition, the tool is distinguished by the presence of a pendulum stroke with four adjustment steps. An electric jigsaw of this type will serve you well when processing sheet materials. The tool to provide fast cutting of wood, plastic, gypsum cardboard, etc.

HIPER HJS18C will serve you not only during repairs, but also in carpentry and furniture workshops. The depth of cut in wood reaches 65 mm, and in aluminum and steel - 8 mm. The stability of the working position is ensured by the cast base of the jigsaw. In addition, the tool of this model allows you to cut at a certain angle, and this makes it easier to perform several tasks at once. Thanks to the metal gearbox, the tool is reliable and boasts a long period of operation.

HIPER HJS18C has a vacuum cleaner connection, so when working at home, you can not worry about excessive dust. With a height and width of 22 cm, the cordless jigsaw weighs 2.3 kg.

Pros :

• cut at an angle;
• built-in battery.

Minuses:

• no.

Reviews:

The best jigsaws

Jigsaw machine BISON ZSL-90

This compact universal machine is capable of all types of processing - figured, longitudinal and oblique sawing. It is possible to use a device for sawing plastic - straight, radius and at an angle.

During operation, the table can be tilted up to 45 degrees, thanks to which it is possible to cut at an angle, and the accuracy of the cut is maintained thanks to the conveyor with a side stop.

For safety reasons, an electromagnetic switch is used, thanks to which the machine is turned on when the power is restored.

The basis of the tool is a brush-collector motor that allows different loads. Thanks to the working reserve of brushes, a long-term operation of the machine is possible without the need to replace them.

Due to the presence of a transparent casing specially provided by the designers that covers the blade, flying chips and sawdust do not cause inconvenience to the worker, since he is protected from them by the casing.

Pros:

• blowing;
• convenience of work;
• great price;
• build quality.

Minuses:

• if you dropped the file down, you will have to disassemble it;
• vibration.

Reviews:

Dremel Moto-Saw (MS20-1/5)

This machine is compact, has a rich set of working canvases and can easily cope with the surfaces of different materials. Can be used both stationary and remotely.

The device has two modes of operation. Fine processing is carried out in a stationary position, and manual mode is used when working with “large-sized” workpieces.

The package includes canvases for wood, for metal, they are replaced quickly and easily.

A long service life of the device is achieved thanks to a special high-strength metal-plastic case.

It is noteworthy that there is a smooth chuck speed controller, with its help you will adjust the machine to the desired load.

Pros:

• mobility;
• installs on almost any surface;
• speed control;
• suitcase included.

Minuses:

• use only native files;
• difficult to make accurate cuts.

Reviews:

Proxxon DS 460

Proxxon DS 460 is a small, compact household type jigsaw, has a desktop design, is transportable.

With this machine, you can perform both curved and straight cuts of workpieces from materials such as wood or plastic. The workpiece for processing should have a width of no more than 300 mm, and a thickness of no more than 40 mm. A jigsaw machine is used if you need to cut out various crafts from wood.

The jigsaw machine is good for home use, and is also used in schools, colleges, vocational schools. The blanks are processed with nail files, which are already included in the standard delivery set. Using the control panel, the user selects the speed at which the nail files will rotate (you can choose from 150 to 2500 rpm). By connecting a chip blower to the machine, you will keep your workplace clean. To charge the machine, a single-phase AC power supply with a voltage of 220 V is used.

Pros:

• stroke frequency adjustment;
• tilt adjustment of the desktop;
• blowing system.

Minuses:

• not found.

Reviews:

RYOBI RSW1240G

Precise cutting of wood and plastic workpieces you get with the help of a compact slotting saw - the Ryobi RSW1240G jigsaw tool. This model is strong and stable. Thanks to the cast-iron base, vibration is significantly reduced and, therefore, a high-precision cut is obtained. The machine has a cast aluminum table. The table can be tilted from 0 to 45 degrees. The work passes over a width not exceeding 405 mm. It is possible to adjust the speed, strokes per minute can be 550 - 1700. The equipment of the machine is complemented by a lighting lamp with a flexible stand and a protective screen.

Whether you need straight, curved or angled cuts, the Ryobi RSW1240G is the right choice for you. This model is a frequenter of carpenters and repair shops.

Pros:

• cast aluminum table;
• the ability to adjust the angle of the table from 0 to 45;
• the ability to adjust the speed;
• the presence of a built-in sawdust blowing mechanism ensures the cleanliness of the workpieces;
• the presence of smooth and pin shanks of saw blades with keyless fixation;
• the presence of a cast-iron base, providing high accuracy in operation and reducing vibration;
• it is possible to connect an industrial vacuum cleaner;
• 127 mm canvas;
• the stroke has an amplitude of 20 mm;
• noise level: 74 dB (A);
• there is a lighting lamp;
• there is a protective screen.

Minuses:

• not found.

Reviews:

The best jigsaw files

Blades for electric jigsaws are called in every way: from jigsaw files to nail files. Blades are one of the most popular sawing consumables. Today, a jigsaw helps to perform the finest household work with speed and accuracy, and in terms of jewelry work, to some extent, it can compete with drills. Jigsaw files can cut any materials: glass, copper, tiles, ceramics, aluminum, etc. Sawing files affect the diversity of the workflow. In addition to the composition of the blade, its shape, dimensions of the tooth, as well as the method by which sharpening is done, and the dimensions of the file itself are of great importance. All this is taken into account by manufacturers. There is a budget option, and more expensive.

Nail files STAYER “STANDARD” for wood

With “STANDARD” STAYER files you can cut different types of wood, plastic using electric jigsaws Bosch, Uragan, Hitachi, Bison, Skil. They contain high-carbon and high-speed steel, which increases the service life. In the production process using high-precision technology, sharpening and grinding of teeth is carried out automatically. The special arrangement of the teeth ensures an easy and quick cut. The European shank connects the saw blades to the jigsaw.

Pros:

• differ in durability;
• compatible with various instrument models;
• the presence of automatic sharpening of teeth;
• the presence of a universal euro-mount;
• the cut is accurate and precise.

Minuses:

• availability in a single copy.

Reviews:

Jigsaw blade set BOSCH Robust Line

Are applied in work with a tree and metal. High-carbon and high-speed steel in the composition ensures a long service life.

A set of saw blades for Bosch Robust Line 2607010542 tools is designed to work with electric jigsaws. The files have a T-shaped tail and one stop. The country of manufacture is Switzerland, it is imported by Robert Bosch LLC.

The set includes ten blades of five types to work on wood and metal: Clean for HardWood, Speed for Wood, Clean for Wood, Flexible for Metal, Progressor for Metal.

Wood saws are grey. Speed for Wood: T144D - used to make quick and coarse cuts in wood (in a straight line) with a thickness of 5mm - 50mm, tooth length 5.2mm. T244D is smaller in width so it is easier to use for indirect cuts.

Clean for Wood: T101B - when you need to make a smooth and accurate straight cut in wood and plastic with a thickness of 3mm to 30mm, it has a tooth length of 2.7mm. The T101AO is designed to make cuts in various shapes of wood in thicknesses from 1.5mm to 15mm.

Clean for Hard Wood: T101BF - when you need to make straight cuts in hardwood and plastic with a thickness of 3 to 30 mm. The T101AOF is used to make similar cuts from 1.5mm to 15mm.

Flexible for Metal, as well as Progressor for Metal: have a blue color and are used for cutting metal. T118AF, T118BF, T123X: used for straight cuts in metal having a width of 1-3 mm, 2.5-6 mm, more than 30 mm respectively. And only a file under the designation T118EOF is used to cut metal not in a straight line, it has the smallest blade width.

Rubberized on the side, shock-resistant, practical case is a storage place for files, each of which is located in its nest.

Pros:

• availability of a universal set;
• good quality canvases;
• neatness and precision of the cut;
• differs in durability.

Minuses:

• high cost.

Reviews:

Set universal Makita A-86898

The Makita A-86898 set is universal and includes blades (5 units) that allow you to process such materials: plastic material, steel, metal (non-ferrous), wood. Files B10S, B13 and B16, having the HCS type; B22 and B23, having the type HSS. This set is versatile, as it consists of five blades of various purposes for cutting any material, with the exception of surfaces such as stone and ceramic tiles.

These blades are used to make straight cuts only.

The special cardboard packaging in which the files are sold contains all the information necessary for the buyer.

The plate on the back of the package will help you choose the right file for a particular type of work. The set includes files B10S, B13 and B16 type HCS; B22 and B23 type HSS, the file B10S has the greatest value.

Type HCS or HSS means that the blades are made of high speed and carbon steel. Let's analyze:

1. File B10S is necessary to make an even cut on wood, it does not have wavy teeth.
2. File B16 - used to make a rough quick cut on wood. This file is just useful, for example, when replacing a wooden window sill with a plastic one.
3. File B13 is an excellent option for working with chipboard, adapted for fast cutting.
4. File B23 - consists of high speed steel (HSS). With the help of small teeth, it cuts plastic or wood with metal residues. The B22 file is distinguished by a small tooth, it is used in working with metal, it requires lubrication.

The above files are distinguished by their workmanship, sufficient thickness, and the presence of an almost universal T-shank.

Pros:

• versatility of the set;
• good quality steel;
• long period of service;
• curved cutting.

Minuses:

• the set consists of 5 pieces.

Reviews:

How to choose an electric jigsaw for home

Consider how to choose the best electric jigsaws for your home. Models characterized by the presence of a powerful engine and a large stroke of the file are best used when working with high-quality material, where accuracy of the cut is needed. Professional models are recommended if you need to perform many tasks.

To choose a jigsaw for your home, you need to analyze its following characteristics.

Engine power

The main characteristic of an electric motor is power. Power directly affects performance. There is the following power rating:

1. Appliances with low power (400 or 550 W), for home use. Cope with cutting wood, the thickness of which reaches 65 mm, and cut metal up to 6 mm.
2. Power in the range of 600 - 900 W is required for professional use for 4 or 5 hours.
3. We do not recommend using weaker tools at home; it is preferable to use a semi-professional device with a power of 500 watts or more.

With a lack of finance, it is better to choose cheaper models.

Web travel

The working backbone of the device is a saw blade. The movement of the saw on the surface depends on the amplitude with which the rod moves, the saw is mounted on the rod. To cut very thick material, it is necessary to ensure the greatest insertion depth as well as the return height. As a rule, the stroke varies from 15 mm to 26 mm.

Small stroke saws (15mm-17mm) have models with a small engine. Such parameters have devices that are better to buy for the home.

Read also: how to check oil by barcode

For thick materials, devices with an amplitude of 19-26 mm are used. They have powerful motors for professional use.

Cutting thickness for different materials

Depth of cut for wood, as a rule, varies from 40 mm to 160 mm. For metal - from 4-5 mm to 30 mm.

Regarding amateur models, for work with wood, a thickness of 70 mm to 80 mm is standardly indicated, and for metal it does not exceed 6 mm.

Tools for professionals will cope with a tree of 100-120 mm, and for metal they will overcome a thickness of 30 mm.

Speed control

Due to the regulation of the stroke frequency, the load on the motor is reduced, it is also possible to provide a gentle mode for the transmission mechanism, it is possible to work with different types of materials:

• high stroke frequencies (from 3000) are used for processing soft wood;
• frequency indicators such as 2500-3000 are used when it is necessary to process hard rocks (for example, cedar, oak);
• soft metals, such as aluminum, will be limited to the 1500-2500 range.

The presence of a pendulum mechanism

The pendulum mechanism is great for fast work without focusing on the quality of the cut. In the working process, the saw moves vertically, as well as back and forth.

Many models have a pendulum, but branded products make it possible to switch the swing amplitude or turn it off completely.

Weight

On the one hand, in the working process, a snug fit of the tool to the surface is desirable, on the other hand, a weighty tool creates inconvenience. As a rule, the tool has a mass of no more than 3 kg, has a massive cast sole. Lightweight home models tend to use less molding—plastic body and gears, and die-forged soles.

Lightweight devices (up to 1.5 kg) are ideal for cutting sheet materials and making figured cuts. For hard wood and metal, massive tools are used, usually weighing 2.5-3 kg.

Read also: what chainsaw to buy for home

Which jigsaw to choose for professional work

Due to the long load on the tool during the shift of the worker, such jigsaws are expected to provide excellent functionality, productivity, reliability, ergonomics - a continuous 7-8 hour work of the operator must be ensured while maintaining productivity and without excessive fatigue. This distinguishes professional jigsaws from household jigsaws and this can be seen even in the photo.

Which electric jigsaw is better to buy? According to their functionality, professional jigsaws should cut wood with a thickness of up to 80-135 mm, steel blanks up to 10 mm thick and aluminum up to 20 mm thick.

The productivity of a jigsaw depends on its power: more power will provide more comfort and cutting speed.

The long service life of the device, operability and reduction of losses due to downtime are ensured by the reliability of the jigsaw.

Components of the device: body, electric motor, sole, saw blade, gearbox. When choosing a jigsaw, pay attention to the following parameters: a sole that allows you to adjust the cutting angle and has a wide adjustment range. Mark yourself the thickness of the metal, which affects the strength, as well as the quality of the cut; the case must cope with mechanical shocks and overheating. Button placement and ease of use also matter. Note that whether there are ventilation holes depends on how well the model is cooled. Regarding fasteners, we recommend choosing models that have a quick-clamping system or two bolts. The type of shank, its length and the shape of the teeth of the saw blades determine how satisfactory the cutting speed will be, sufficient power for household appliances is 350-700 W, for professional ones you need more.

In such an indicator as the thickness of the cut, the power and hardness of the material play a decisive role. For household appliances, it is up to 10 mm, and for professional - up to 110 mm; as for the duty cycle - constant use is not suitable for household models, unlike professional ones. Speaking of the pendulum movement, it is worth noting that in standard models only up and down movement is provided.

When buying, carefully study the characteristics. The best electric jigsaw Makita 4324, declared as professional, can cut wood with a thickness of up to 65 mm, and the Metabo STEB 135 plus jigsaw can overcome material with a thickness of up to 135 mm.

An additional advantage when working with a jigsaw will be the mechanism by which sawdust is sucked out.

Professional jigsaws from manufacturers such as BOSCH GST 135 BCE, Makita 4350FCT, 4329, METABO STE 70, etc. have good recommendations.

Which jigsaw is better to buy

And yet - when choosing, we recommend paying special attention to the reviews about the tools, since everything has already been tested before us, far and wide. Indeed, in fact, many of the functions may remain unclaimed, and the cost of the device for them sometimes soars at times. A small saving in such cases can result in an unpleasant experience - so maybe you should not save on yourself? Choose wisely. Enjoy the shopping!